Table of Contents
Advertisement
1.32 Motion Tracking
5
1
[Enable Camera]
Click on the camera buttons to enable motion
tracking function.
You must select the appropriate camera in the
'Hardware Setup' section (p. 13) before these
buttons will appear.
2
[Current Camera]
Use the drop down arrow to select the camera
you want to set up. The selected camera's live
image will appear in the area on the left.
3
[Screen Value]
Click to set the value to the position showing
in the camera image.
4
[Move Camera]
Click to move camera to values entered in the
'Pan' and 'Tilt' boxes under 'Start Position'.
1
2
3
4
6
5
Use drop down arrows to set start position of
motion tracking camera. Camera will return to
this position when motion is no longer detected
and followed.
6
Use the drop down arrow to select how long
the camera will remain in its last position after
motion is no longer detected and followed.
7
Click to move camera to values entered in the
'Pan' and 'Tilt' boxes under 'Start Position'.
[Start Position Pan /Tilt Values]
[Return Start Position]
[Return Start Position]
52
Advertisement
Table of Contents
