Record Mode - CCTV DN-1808S Manual For Installer And User

1
2
1 [Camera]
Select the camera you wish to setup. All the de-
scription below are related to the selected camera .
2
[Setting Recording Mode]
The table displays recording mode for every
hour. To change Record Mode, click on the
hour you wish to change ( you can drag mouse
to select multiple boxes. The selected time will
be highlighted blue. Then change the mode
from Record Mode setting.
To be exact to minutes, click on the time you
wish to change and a horizontal bar will appear:
01 min
[Simple/Advanced Mode]
3
In "Simple" mode, all days (Weekdays, Saturdays,
and Sunday/Holidays) are set on a single 24 hour
timeline. Any time adjustments you make will apply
to all days.
In "Advanced" mode, Weekdays, Saturdays, and
Sunday/Holidays each have their own 24 hour time-
line.
4
59 min
3
4
4

[Record Mode]

Select Record Mode for selected time interval. If
no mode is selected, the system will not record.
Default is Motion & Sensor Record for 24 hours
for all date of the year
Recording
Supported Recording
mode Mode/combinations
• C: Continuous Rec. • No rec.
• M: Motion Rec. • Continuous rec.
• S: Sensor Rec. • Motion rec.
• P: Pre-Alarm Rec. • Sensor rec.
• Pre-Alarm Rec.
• Sensor & Pre-Alarm rec.
• Motion & Pre-Alarm rec.
• Motion & Sensor rec.
• Motion & Sensor & Pre-
Alarm rec.
!
Motion Recording, Sensor recording, and
Pre-Alarm Recording cannot be enabled in
conjunction with Continuous recording.
26