Table of Contents
Advertisement
1.13 Motion Detection
2
1
[Camera]
Select the camera you wish to setup. The de-
scription below is related to the camera you
selected here .
[Detection Area]
2
To enable cameras to record automatically by
motion detection, you mush select the detection
areas. To select detection area, place the mouse
cursor over the channel screen and drag the
cursor in any direction you wish. You can as-
sign up to 5 separate areas for each camera .
3
[Sensitivity]
Change sensitivity of motion detection. Default
value is set to 15 and it is the recommended
value.
1
3
4
5
4
[Alarm]
If the box is checked, the internal speaker will
beep when the camera detects motion .
The speaker however will not beep if the camera
is set to Continuous Recording mode in Sched-
uled Setup (see page 26). The speaker's activa-
tion time can set by the scroll lists.
[Control]
5
When the camera detects motion, the connected
control will activate for the designated time.
20
Advertisement
Table of Contents
