Schedule Setup - CCTV DN-1808S Manual For Installer And User

1.15 Schedule Setup

> Schedule setup allows you to determine what mode your cameras will operate in at any
given time of day.
•
Continuous:Cameras will record continuously.
•
Motion: Cameras will record only when motion is detected.
•
Sensor: Cameras will record when triggered by associated sensors.
•
Prealarm: Cameras will record events up to 5 seconds before motion is detected.
>
Place a checkmark in the box to enable the mode(s)
>
Removing the checkmark from all four options will set the camera to "Look Only" mode.
(No video will be recorded)
>
You may use more than one mode on each camera.
>
Supported modes include:
•
Look Only (No record)
•
Continuous Record (Disables Motion, Sensor, and Prealarm functions)
•
Motion
•
Sensor
•
Motion + Sensor
•
Motion + Prealarm
•
Sensor + Prealarm
•
Motion + Sensor + Prealarm
25