Table of Contents
Advertisement
2.8 Search Mode
1
[Print]
Left click on the Print button to print the currently selected still image.
(Stop playback and select an image by left clicking on it.)
The printed image size is determined by the image size on the screen. Use the 'Enlarge Image' tool to
set the image size.
The printed image will show the image, the site code of the DVR (p.33), the date and time the image
was taken, the camera number, and the watermark status.
2
[Data Backup]
To save a backup of recorded data.
(see page...77)
3
[Bookmark]
The Bookmark function allows you to index certain events or images
for quick access through a list instead of having to choose a date,
time and camera for search.
When you find an image or event to Bookmark, select the
image by left clicking on it.
The image will move to the center of the view screen. Click on the
Bookmark button to bring up the Bookmark list. Click on 'Add' to
enter the image information into the list.
Click on an entry on the list to select it
and click 'Delete' to remove it from the list.
Click to delete all entries on the list.
4
[Audio Setup]
You
must enable audio save and playback in 'Audio Setup' (p.42) to use this function. Se-
lect the camera associated to the audio by clicking on the image and setting it to center
screen. Click on the 'Audio' button to show the volume slider.
>
Place a check in the 'Enable' box and adjust the volume with the slider until audio is at a
comfortable level. Click on 'OK' to save your setting.
You must have a microphone and speakers attached to the DVR to use the audio function.
See page 49 for instructions on setting up the DVR for audio recording.
You must have a microphone and speakers attached to the DVR
!
to use the audio function. See page 77 for instructions on setting
up the DVR for audio recording.
5
[Recording]
Click
on the button to stop recording live images while you are in Search Mode. If the DVR is set to
record at high quality and larger screen sizes in 'Motion Setup' you may notice Search functions will
slow down slightly. This is norm due to the large amount of data being written to the storage drive.
When the live recording is disabled the button will have a red 'X' over it.
Use this function if you experience errors while recording backup data to a CD-R/CD-RW. (Especially
when recording AVI backups.)
1
2
4
Select an entry in the list and click 'Goto' to
show that image on the view screen.
3
5
67
Advertisement
Table of Contents
