Attach Upper Stability Brackets (To Torsion Tube); Attach Front Column Mount (To Upper Stability Brackets) - BIG ASS FANS Pivot 180 Installation Manual

12
Mounting Method: Structural Stability Package (cont.)

6. Attach upper stability brackets (to torsion tube)

While the torsion tube is still in the horizontal position, attach it to the upper stability brackets using the Torsion Tube Hardware as
shown below. Securely tighten the nuts.
Torsion Tube Hardware (BAF-supplied):
a. (2) 1/2"-13 x 1-1/2" GR 8 Bolt
b. (4) 1/2" Washer
c. (2) 1/2"-13 Nut

7. Attach front column mount (to upper stability brackets)

Attach the front column mount to the upper stability brackets using the Upper Stability Bracket Hardware as shown. Securely tighten the
nuts. Note: The torsion tube may have to be raised slightly off the ground in order to allow for enough clearance.
Upper Stability Bracket Hardware (BAF-supplied):
a. (2) 1/2"-13 x 1-1/2" GR 8 Bolt
b. (4) 1/2" Washer
c. (2) 1/2"-13 Nylock Nut
Side View
PIVOT™ 180
c
WWW.BIGASSFANS.COM ©2011 DELTA T CORP.
b
c
b
b
a
ALL RIGHTS RESERVED
Torsion
Tube
b
a
Torsion
Tube
Front
Column
Mount