Route Wiring And Safety Cable Into Extension Tube; Attach Upper Mount And Upper Mounting Brace (To Extension Tube) - BIG ASS FANS Essence Installation Manual

16

1. Route wiring and safety cable into extension tube

Note: To facilitate installation, Big Ass Fans recommends that the extension
tube is horizontal with the rectangular access hole facing up during this step.
Route the wiring harnesses on the power supply cable and the controller input
cable down into the top of the extension tube and out the rectangular access
hole as shown. Route the end of the safety cable with the lug on it down into
the top of the extension tube and out the bottom of the tube as shown.

2. Attach upper mount and upper mounting brace (to extension tube)

Note: To facilitate installation, Big Ass Fans recommends that the extension tube is horizontal with
the rectangular access hole facing up during this step. Wiring and the safety cable are not shown in
the illustrations.
Insert the upper mounting brace into the top of the extension tube and align the four (4) mounting
holes in the brace with the four (4) mounting holes at the top of the tube as shown on the right.
Position the power supply cable, controller input cable, and safety cable in any of the four (4)
spaces between the upper mounting brace and the extension tube as shown below. Note: The
cables can go in any of the four spaces. They do not all need to be in the same space.
Attach the upper mounting brace (inside the extension tube) and the upper mount to the extension
tube using the Extension Tube Hardware as shown below. Tighten the hardware so that it is
snug, but do not torque.
Extension Tube Hardware (BAF-Supplied):
a. (2) M10 x 90 mm Socket Head Cap Screw
b. (4) M10 Flat Washer
c. (2) M10 Nylock Nut
Spaces for cables
(use any of the four)
Extension tube with upper
mounting brace inside
(view from above)
ESSENCE
Hanging the Fan
a
WWW.BIGASSFANS.COM ©2013 DELTA T CORP.
®
Controller Input
Cable
Upper Mounting Brace
b
ALL RIGHTS RESERVED
Power Supply
Cable
Safety Cable
Upper
Mounting
Brace
c
b