Attach Extension Tube (To Upper Yoke); Secure Upper Safety Cable - BIG ASS FANS powerfoil x2.0 Installation Manual

1. Attach extension tube (to upper yoke)

Fasten the extension tube to the upper yoke with the Extension Tube
Hardware as shown. In order to efficiently drain water, the tube must be
oriented so that slots on the bars between the extension tube flanges are
facing downward. Refer to the illustration below.
Ensure the extension tube is hanging plumb to the ground, and then
tighten the hardware so that it is snug, but not fully tightened.
Extension Tube Hardware (BAF-Supplied):
a. (2) 1/2-13 Nylock Nut
b. (4) 1/2'' Flat Washer
c. (2) 1/2-13 x 4-1/2'' GR 8 Bolt

2. Secure upper safety cable

The safety cable is a crucial part of the fan and must be installed correctly. If you have questions or require assistance,
call Customer Service for assistance.
Wrap the safety cable around the mounting structure and secure the looped ends with the shackle as shown. The cable must be drawn
tightly around the I-beam or angle iron, leaving as little slack as possible. The shackle should be on the topside of the I-beam or angle
iron if possible. Securely tighten the shackle.
I-Beam Mount
8'–24' POWERFOIL X2.0 WASHDOWN & POWERFOIL
®
Hanging the Fan
Slots facing
downward
Direct Mount
WWW.BIGASSFANS.COM ©2012 DELTA T CORP.
X2.0 PLUS WASHDOWN
®
Shackle
ALL RIGHTS RESERVED
b
b
a
Angle Iron Mount
19
c