Parts Included - BIG ASS FANS Pivot 180 Installation Manual

What's in the box (cont.)
Structural
Stability
Box*
*The Structural Stability Package is only included if ordered. An Extender package is required if the fan is mounted higher than 14 ft.

Parts included

Note: Drawings are not to scale.
Lower Yoke Hardware
(2) 1/2-13 x 4-1/2" GR 8 Bolt
(4) 1/2" Flat Washer
(2) 1/2-13 Nylock Nut
Airfoil Hardware
(12) 5/16-18 x 2-1/4'' GR 8 Bolt
(36) 5/16'' Flat Washer
(12) 5/16-18 Nut
Structural Stability Hardware*
(12) 1/2" Flat Washer
(2) 1/2-13 x 4-1/2" GR 8 Bolt
(4) 1/2-13 x 1-1/2" Screw
(6) 1/2-13 Nylock Nut
*The Structural Stability Package is only included if ordered.
(2) Attachment Channel
Pre-Installation (cont.)
(2) Lower (2) Upper
Stability Bracket Stability Bracket
Main Fan Unit Hardware
(4) 1/2-13 x 1-3/4" GR 8 Bolt
(8) 1/2" Flat Washer
(4) 1/2-13 Nylock Nut
Column Mount Hardware
(4) 1/2-13 Threaded Rod
(4) 3" Square Washer*
(16) 1/2" Flat Washer
(16) 1/2-13 Hex Nut
(8) 1/2-13 Nylock Nut
*Square washers are packaged in the Main
Fan Unit box.
(4) Beam Clip & Spacer
WWW.BIGASSFANS.COM ©2011 DELTA T CORP.
PIVOT™ 180
Hardware
Winglet Hardware
(6) 10-24 x 1/2" Bolt
(6) 10-24 x 3/4" Barrel
Safety Cable Mount Hardware
(2) 1/2-13 Threaded Rod
(12) 1/2" Flat Washer
(8) 1/2-13 Hex Nut
(6) 1/2-13 Nylock Nut
(1) 1/2-13 x 5" Hex Head Bolt
(1) 1/2-13 x 4-1/2" Hex Head Bolt
(3) Safety Cable Spacer (not pictured)
Safety Cable
ALL RIGHTS RESERVED
3
Torsion Tube