Attach Lower Cage Sections (To Upper Cage); Secure Lower Cage - BIG ASS FANS Pivot 180 Installation Manual

22

3. Attach lower cage sections (to upper cage)

Use two (2) outer cage clips (one on each end) to hang a lower cage
section from the upper cage.
Secure the lower cage section to the upper cage using the Cage
Fastener Hardware as shown.
Repeat this step for the other cage sections. Make sure to secure
adjacent sections first.
Cage Hardware:
a. (12) 1/4-20 x 1'' Flange Bolt
b. (12) 1/4-20 Flange Nut

4. Secure lower cage

Fasten the lower cage sections to each other using the Cage Fastener
Hardware (1/4-20 bolts and nuts) as shown. Torque the bolts to 10 ft·lb
(13.6 N·m).
Attach the inner cage clips to the outer cage clips using the Cage Clip
Hardware (10-32 bolts and nuts) as shown.
Cage Hardware:
a. (12) 1/4-20 x 1'' Flange Bolt
b. (12) 1/4 -20 Flange Nut
c. (8) 10-32 x 1/2" Flange Bolt
d. (8) 10-32 Flange Nut
PIVOT™ 180
Installing Cage (cont.)
WWW.BIGASSFANS.COM ©2011 DELTA T CORP.
Outer Cage
a b
c
d
a
b
ALL RIGHTS RESERVED
Clip