Insert Inner Torsion Tube Connectors (Into Torsion Tube); Attach Outer Torsion Tube Connectors (To Torsion Tube); Attach Torsion Tube Extension (To Torsion Tube Connectors) - BIG ASS FANS Pivot 180 Installation Manual

Mounting Method: Structural Stability Package (cont.)

3. Insert inner torsion tube connectors (into torsion tube)

If you are not installing the Structural Stability Package Extension (second torsion tube), skip this step and proceed to
step 6 on page 12.
While the torsion tube is still in the horizontal position, insert the two (2) inner torsion tube connectors into the torsion tube. Align the
bottom four (4) holes in the connectors with the four holes at the top of the torsion tube as shown.
Inner Torsion Tube
Connectors

4. Attach outer torsion tube connectors (to torsion tube)

If you are not installing the Structural Stability Package
Extension (second torsion tube), skip this step and
proceed to step 6 on page 12.
While the torsion tube is still in the horizontal position, attach
the two (2) outer torsion tube connectors to the torsion tube and
inner torsion tube connectors using the Torsion Tube Extension
Hardware as shown. Align the holes in the outer connectors with
the holes in the torsion tube and inner connectors. Insert bolts into
only the bottom four (4) holes as shown. Securely tighten the bolts.
Torsion Tube Extension Hardware (BAF-supplied):
(4) 1/2"-13 x 1-1/4" GR 8 Hex Cap Bolt

5. Attach torsion tube extension (to torsion tube connectors)

If you are not installing the Structural Stability Package Extension (second torsion tube), skip this step and proceed to
step 6 on page 12.
While the torsion tube is still in the horizontal position, carefully insert the torsion tube extension between the inner torsion tube
connectors and outer torsion tube connectors. Align the four (4) holes at the bottom of the torsion tube extension with the four holes in
the torsion tube connectors. Attach the torsion tube extension to the connectors using the remaining Torsion Tube Extension Hardware
as shown. Securely tighten the bolts.
Torsion Tube Extension Hardware (BAF-supplied):
(4) 1/2"-13 x 1-1/4" GR 8 Hex Cap Bolt
Torsion Tube
Torsion Tube
Extension
WWW.BIGASSFANS.COM
PIVOT™ 180
Outer Torsion Tube
Connectors
©2011 DELTA T CORP. ALL RIGHTS RESERVED
Torsion
Tube
Inner Torsion Tube
Connectors
11