Hex Nuts; Hex Lock Nuts (Stover); Other Nuts - Taylor-Dunn RE-380-36 Operator's And Service Manual

Appendixes

Hex Nuts

Nuts with no markings are to be treated as S.A.E. Grade 2
S.A.E. Grade 5 S.A.E. Grade 8
5.8 8.8 10.9 12.9
Metric Nuts

Hex Lock Nuts (stover)

Lock nuts use a letter to indicate the grade of the nut. Grade A' locknuts would be the equivelent of Grade '2'
hex nuts, Grade 'B' as Grade '5' and Grade 'C' as Grade '8'.
NOTE: Nuts with no markings are to be treated as S.A.E. Grade A
B C
or, or, or, or,
S.A.E. Grade B S.A.E. Grade C
Grade L'9

Other Nuts

®
Other nuts used by Taylor-Dunn should be treated as S.A.E. grade A
Appendixes
*Not available at time of printing
Appendix B
Page 5