Appendix A: Special Tools - Taylor-Dunn RE-380-36 Operator's And Service Manual

Appendixes

APPENDIX A: SPECIAL TOOLS

Note: This is a listing of all tools
available. Not all tools would be
required for all vehicles. Refer to
the Maintenance, Repair, and
Troubleshooting sections for
information on tools required.
41-532-50: Chain Case Centering Tool
Used to center the chain case cover on all
vehicles equipped with the Power Traction
primary reduction and a pinion brake or speed
sensor. Includes instructions.
62-027-61 and -62: Sevcon System
Handset
Diagnostics and adjustments (-62 only) of
the Sevcon Power Pak and Micro Pak
control systems.
Appendixes
Appendix A
Page 2
62-027-32: Throttle Module Analyzer
Tests the throttle module in or out of the vehicle
43-201-50: Pinion Seal Installation Tool
Used to install the pinion seal on all vehicles
equipped with the Power Traction primary
reduction and a pinion brake or speed sensor.
62-027-64 and -65: Curtis AC System
Handset
Diagnostics and adjustments (-65 only) of the
Curtis AC control system.
75-089-00: Throttle Module Test Harness
Used in conjunction with a volt meter to test
the throttle module. The module must be
installed in a working control system.
Note: Part # 62-027-31 includes instructions
62-027-00: Test Light
Used for testing electrical circuits. Switchable
for 12, 24, 36, 48 volt systems.
Required to complete troubleshooting provided
in the vehicle service manuals.
96-500-43: PMT/C Meter Reset Module
Required to reset the PMT/C maintenance
meter (special order option).