Taylor-Dunn RE-380-36 Operator's And Service Manual page 97

Transmission
TABLE OF CONTENTS
Check Oil Level ............................................. 2
Change Oil ..................................................... 3
Motor Removal and Installation .................... 4
Rear Hub or Rotor ......................................... 5
Removing and Installing the Rear Axles
(Disc Brakes) ........................................... 6
Transmission Assembly ................................ 8
Remove and Install .................................................. 8
Disassembly and Reassembly of the Primary
Reduction Gear Case .............................. 9
Disassembling the 3rd Member .................... 12
Assembling the 3rd Member ......................... 15
Pinion Bearing Preload ............................................ 18
Pinion Gear Shimming Instructions ............. 19
Setting the Pinion Gear Depth ............................... 19
GT Transmission Assembly
With Disc Brakes