Taylor-Dunn RE-380-36 Operator's And Service Manual page 213

Parking Brake Linkage
Item# Part#
1 51-344-80
2 88-080-11
3 96-826-08
4 88-089-81
5 88-088-61
6 96-826-09
7 04-380-49
8 88-527-11
9 96-773-00
10 96-763-00
11 88-099-80
12 00-200-48
13 04-380-13
14 80-410-20
15 88-100-09
88-109-81
16 04-380-50
17 96-763-00
18 88-099-81
19 96-343-00
20 88-099-80
21 96-765-00
22 96-754-00
3/1/2008: Part numbers 41-350-72 (bracket) and 41-350-73 (plastic trim) were added to support the
parking brake arm on the rear calipers. The bracket is mounted under the arm, retained by one of the
drive mounting u-bolts. Refer to bulletin BUL-08-01-001* for details. The addition of the bracket helps
reduce brake noises. This is a temporary revision and will be in use until the brake body is updated to
provide additional support.
*-A copy of the bulletin is included on the CD provided with the vehicle. If you do not have the CD, a
copy of the bulletin may be obtained through your dealer or by contacting Taylor-Dunn.
Description
Park brake lever
5/16NV x 1 Hex bolt
Brake cable
5/16NV Hex lock nut
5/16 SAE Flat washer
Cable lock
Extension, brake handle
Cotter pin
Clevis pin
Clevis
5/16NF Hex nut
Park brake linkage (handle to equalizer)
Brake cross shaft
Bearing
Hex bolt
3/8NC Hex lock nut
Equalizer
Clevis
5/16NF Hex nut, left hand thread
Rod, linkage
5/16NF Hex nut
Clevis
Clevis, formed
Parts Page 27
Illustrated Parts
QTY
1
4
2
4
2
2
1
5
5
1
1
1
1
2
4
4
1
1
1
1
1
1
2