Troubleshooting - Soyer BMK-12 W Operating Instructions Manual

10 Troubleshooting

The following list of errors, their causes and remedies is designed to help you
eliminate any trouble immediately on the spot. If it is difficult or impossible to eliminate
the trouble, please contact the SOYER customer service responsible for your area or
Heinz Soyer Bolzenschweißtechnik GmbH.
For address and telecommunication data, please refer to chapter 1.6 (contacts and
service address).
Always disconnect the connecting plug from the socket before opening the housing of
the stud welding equipment. Only trained and appropriately qualified personnel are
allowed to carry out works at the electric power supply and welding system.
Only trained and appropriately qualified personnel are allowed to replace components
of the stud welding equipment.
Before starting any repair work, disconnect the shielding gas supply from the
connections located at the front of the stud welder.
62
DANGER
CAUTION
DANGER
BMK-12 W