Rear Brake Cable Installation - Club Car 2008 Turf Maintenance And Service Manual

WHEEL BRAKE ASSEMBLIES
2
4
1
Figure 6-38 Loosen Equalizer Nut

REAR BRAKE CABLE INSTALLATION

1. Place the cable ends in the equalizer (4) (Figure 6-38, Page 6-23). Route cables through hangers in the
same manner as the ones removed.
2. At the rear wheel brakes, connect the cables to the brake actuator arms using clevis pins (2) and new
bow-tie pins (1) (Figure 6-39, Page 6-23).
3. Place cables in cable support bracket (5) and secure with E-clips.
4. Adjust brakes as described in this section for the appropriate vehicle.
3
2008 Turf/Carryall Vehicle Maintenance and Service Manual
3
5
Figure 6-39 Disconnect Cables at Rear Brakes
6
Rear Brake Cables
2
4
1
Page 6-23