13. Install the upper output tray [9] (
14. Turn on the main power switch of the machine.
15. Check the finisher operation.
Support Tray Installation
If a stacking problem occurs several times on the upper output tray [1], put the support tray
[2] on the tray as shown.
Keep this tray in the manual pocket if this tray does not need to be installed.
SM
CÓPIA NÃO CONTROLADA
x 1; M3 x 8).
1-21
CÓPIA NÃO CONTROLADA
3000-Sheet Finisher (B805)
G179