The holder bracket [3] must be placed outside the front joint bracket [2]. The
holder bracket [3] is provided with the Bridge Unit (D386).
3.
Install the grounding plate [5] on the finisher (
Use the screw removed in step 1 and the screw from the accessory box.
4.
Open the front door [6] then pull the locking lever [7].
5.
Align the finisher on the joint brackets, and lock it in place by pushing the locking lever.
6.
Secure the locking lever (1 knob screw; M3 x 8).
7.
Close the front door.
8.
Install the copy tray [8] (1 knob screw; M4 x 10).
9.
Connect the finisher cable [9] to the main machine as shown above.
10. Attach the staple position decal to the top right cover.
11. Turn on the main power switch and check the finisher operation.
SM
CÓPIA NÃO CONTROLADA
x 2; M3 x 8)
1-31
CÓPIA NÃO CONTROLADA
1000-Sheet Finisher (B408)
G179