Controller Service Mode - Ricoh G179 Service Manual

5.2 CONTROLLER SERVICE MODE

5.2.1 CONTROLLER SERVICE MODE
1001 [Bit Switch]
1001 001 Bit Switch 1
1001 002 Bit Switch 2
1001 003 Bit Switch 3
SM
CÓPIA NÃO CONTROLADA
*CTL
Adjusts bit switch settings. DFU
Bit 0 to 2: Not used. Do not change the
settings.
Bit 3: Changing the print language (PCL <->
PS)
*CTL
0: Enabled
1: Disabled (No change)
Bit 4 to 7: Not used. Do not change the
settings.
Bit 0: PostScript3 Euro glyph
Bit 1: Not used. Do not change the setting.
Bit 2:PCL5e/5c (HP4000/HP8000)
The left space command is set to "0", the
*CTL machine is changed to "1"
Bit 3: PCL5e/GL2: pen # of PW
Bit 4: Tray selecting
5-5
CÓPIA NÃO CONTROLADA
Controller Service Mode
0: Disabled
1: Enabled (Even if there is no
Euro Glyph in the ROM, it is
possible to load the Euro
Glyph data.)
0: Disabled
1: Enabled
0: Normal
1: Patch
0: Ricoh GW products (If a
tray is selected using PCL5e
commands and it has paper,
G179