Memory Clear: Sp - Ricoh G179 Service Manual

Using SP Modes
Check the nip bandwidth around the center of the OHP.
Nip band Specification: 7.0 ± 0.5 mm

5.26.4 MEMORY CLEAR: SP5-801

Executing Memory Clear resets all the settings stored in the NVRAM to their default
settings, except the following:
SP5811-1: Machine serial number
SP5907: Plug & Play Brand Name and Production Name Setting
This procedure restores all SP code settings to their factory default settings.
Before clearing all settings in memory with SP5801, print an SMC report with
SP5990. You may need this for reference to restore previously adjusted settings.
1. Push and together, hold down for over 5 seconds, release and then press the
"OK" button.
2. Press or to display "2.Engine".
3. Press the "OK" button.
4. Press or to display "5.Mode" then press the "OK" button.
5. Press or to display "SP5801/Memory Clear" then press the "OK" button.
6. With "ALL Clear" displayed, press the "OK" button, then press the "EXECUTE" button.
7. With "Would you like starting..." displayed, then press the "EXECUTE" button again to
execute.
<All>
result=OK
Here is a summary of all the settings.
No. Item
001 All
002 Clear Engine
G179
CÓPIA NÃO CONTROLADA
All items in this table
All settings set for engine and processing
5-154
CÓPIA NÃO CONTROLADA
What It Initializes
SM