Drum Cleaning Blade 2; Re-Installation; Drum Cleaning Blade 1 - Ricoh G179 Service Manual

3. Remove cleaning blade 2 [A]. (

Re-installation

Engage the left end of the cleaning blade first, then make sure that both arms [B] and
[C] are through the holes on the left and right side.
When you re-attach the snap-ring, make sure that the head of the snap ring [D] is
below the blade.
After re-assembly make sure that the front spring of the movable cleaning blade is
re-attached to the

3.5.6 DRUM CLEANING BLADE 1

1. Drum ( Drum)
2. Charge roller and cleaning roller (
3.

Drum cleaning blade 2 (

4. Remove drum cleaning blade 1 [A] (
SM
CÓPIA NÃO CONTROLADA
x 1, bushing x 1)
, position. ( Drum)
Charge Roller and Cleaning Roller)
Drum Cleaning Blade 2)
x 2)
3-19
CÓPIA NÃO CONTROLADA
PCDU
G179