Ricoh G179 Service Manual page 283

NVRAM Download
Downloads data from an SD card to the NVRAM in the machine. After
5825
downloading is completed, remove the card and turn the machine power off
and on.
5828 Network Setting
IPv4 Address (Ethernet/IEEE 802.11)
001
This SP allows you to confirm and reset the IPv4 address for Ethernet and
wireless LAN (802.11): aaa.bbb.ccc.ddd
IPv4 Subnet Mask (Ethernet/IEEE 802.11)
002
This SP allows you to confirm and reset the IPv4 subnet mask for Ethernet
and wireless LAN (802.11): aaa.bbb.ccc.ddd
IPv4 default Gateway
(Ethernet/IEEE 802.11)
003
This SP allows you to confirm and reset the IPv4 default gateway used by
the network for Ethernet and wireless LAN (802.11): aaa.bbb.ccc.ddd
DHCP (Ethernet/IEEE 802.11)
This SP code allows you confirm and change the setting that determines
whether the IP address is used with DHCP on an Ethernet or wireless
006
(802.11) LAN network.
[0 to 1 / 1 / 1]
0: Not used (manual setting)
1: Used
Active IPv4 Address
021
This SP allows you to confirm the IPv4 address that was used when the
machine started up with DHCP.
Active IPv4 Subnet Mask
022
This SP allows you to confirm the IPv4 subnet mask setting that was used
SM
CÓPIA NÃO CONTROLADA
5-67
CÓPIA NÃO CONTROLADA
SP5-xxx: Mode-3
G179