Ricoh G179 Service Manual page 243

3: Horizontal Line (1 dot)
4: Horizontal Line (2 dot)
5: Grid Vertical Line
6: Grid Horizontal Line
7: Grid pattern small
8: Grid Pattern Large
9: Argyle Pattern Small
10: Argyle Pattern Large
11: Independent pattern (1 dot)
12: Independent Pattern (2 dot)
002 Density
2201* Dev. Bias Adj.
Development Bias
001
Adjusts the development bias for printing.
Use as a temporary measure to correct faint printouts from an aging drum.
ID Sensor Pattern
002
Adjusts the development bias for the ID sensor pattern for VSP
Forced Toner Supply
2207
Forces the toner bottle to supply toner at 1-second intervals for up to 30
seconds. To start, press the "EXECUTE" button.
Toner Supply Mode
2208*
Selects the toner mode.
If you select "1", SP2-209-002 should be set to its default value. Use image
SM
CÓPIA NÃO CONTROLADA
16: Hound's Tooth Check (Horizontal)
17: Black Band (Horizontal)
18: Black band ( Vertical)
19: Checker Flag Pattern
20: Grayscale (Vertical Margin)
21: Grayscale (Horizontal Margin)
22: Two Beam Density Pattern
23: Full Dot Pattern
24:All white Pattern
[0 to 15 / 15 /1 ]
Set the density of the test pattern which is output in
SP2109-001. This SP is not used for the Grayscale
patterns.
[200 to 700 / 560V / 10V ]
[200 to 700 / 400V / 10V ]
[0: Sensor, 1: pixel ]
5-27
CÓPIA NÃO CONTROLADA
SP2-xxx: Drum-1
G179