Ricoh G179 Service Manual page 334

SP8-xxx: Data Log2-1
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8067
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
806x 2 Stack
806x 3 Staple
806x 4 Booklet
806x 5 Z-Fold
806x 6 Punch
806x 7 Other
G179
CÓPIA NÃO CONTROLADA
[0 to 9999999 / 0 / 1]
Number of jobs started in Sort mode.
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
Reserved. Not used.
5-118
CÓPIA NÃO CONTROLADA
SM