Installation Of The Pen Tray - Ricoh IWB-D1 Field Service Manual

3. With the DVI cable, connect the monitor unit and controller unit of the main part.

Installation of the pen tray

Attach the pen trays [A] ( x 2) to the main part after installation.
The pen tray can be attached at the left end, center, or right end of the main part's lower part.
• When attaching the pen tray, a Phillips screwdriver or a coin is needed according to the place
where the main part is installed.
• Remove the pen tray when removing the main part from a stand or a wall.
Main machine installation
19