Section E - Teardown; Removing The Top Grates; Removing The Simmer Burner Cap; Removing The Simmer Burner Base - Electrolux E30GF74GPS Technical & Service Manual

SECTION E - TEARDOWN

This section will describe how to remove components
from the range. Unless stated, the procedure will be
the same on all models. Unless stated, reverse the
procedure to reinstall the component.
Always remove electrical power
WARNING
from the range when working in an area where electri-
cal power is present.
Always turn the gas off to the
WARNING
range before opening any gas piping.
Note: Not all components are in all models.

Removing the top grates:

1
. The top grates lift off.

Removing the simmer burner cap:

1.
The simmer burner cap lift off.

Removing the simmer burner base:

1. The simmer burner base lift off.

Removing the main burner head:

1. Lift the main burner head up to clear the igniter
and lift it off.
65