Stapler Position Adjustment; Stapling Center Position Adjustment - Konica Minolta BizHub Pro 1050 User Manual

01 Stapler Position Adjustment

01 Stapling Center Position Adjustment

Perform this adjustment for the center position of copied/printed sheets and of
staples processed by the FS-503 Staple Finisher.
The paper width adjustment is supposed to be completed before this adjustment.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 01 Stapler Position Adj.
2 Touch 01 Stapling Center Position Adjustment to display the Stapling Center
Position Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Press [Start]. A sample copy will be output.
5 Use the touch panel keypad to enter the desired adjustment value, then touch
Set.
Available range: -20 (forward) to +20 (backward), 1 step = 0.1 mm
2-19