Using A Mouse; Using A Remote Controller - Ness IQ User Manual

2.4 Using a Remote Controller

Using a Remote Controller
Usage of a remote controller is same as the front panel Usage of a remote controller is same as the front panel keys.
Follow the procedure below when using the remote controller for multi DVRs. Follow the procedure below when using the remote controller for multi DVRs.
① Check System ID (e.g., between 1 and 255) of the DVR that wish to use.
Check System ID (e.g., between 1 and 255) of the DVR that wish to use.
- (SETUP>SYSTEM>Information>Status>System ID).
(SETUP>SYSTEM>Information>Status>System ID).
② Holding up the remote controller to face towards the DVR and press the System ID numbers one by one, while pressing
Holding up the remote controller to face towards the DVR and press the System ID numbers one by one, while pressing Holding up the remote controller to face towards the DVR and press the System ID numbers one by one, while pressing
ID button on the remote controller. Note that the System ID is a ID button on the remote controller. Note that the System ID is a 3-digit number. Button '10
- (e.g.: If System ID is 3, press 10>10>

2.5 Using a Mouse

Mouse provides an easier access to adjustment. Refer to below for proper use. Mouse provides an easier access to adjustment. Refer to below for proper use.
Left mouse button functions the same as Enter ( ) key on the front panel of DVR. Left mouse button functions the same as
Right mouse button displays the following "Function keys" on screen. e button displays the following "Function keys" on screen.
Click Search menu at "Function Keys" the same as Click Search menu at "Function Keys" the same as Search key on the front panel of DVR. Press the button, then the Search
menu will appear on screen.
4 / 8 Channel 960H & 4 Channel SDI
Name of Key
Change display mode
Display
Display each channel sequentially Display each channel sequentially
Sequence
Use spot monitor
Spot
Freeze on live/recorded display Freeze on live/recorded display
Freeze
Picture in Picture function Picture in Picture function
PIP
En/Disable PTZ control En/Disable PTZ control
PTZ
16 Channel 960H & 8 / 16 Channel SDI 960H & 8 / 16 Channel SDI
Name of Key
Same as front key
Display
Same as front key
Sequence
Same as front key
Spot
Same as front key
Freeze
Same as front key
PIP
Same as front key
PTZ
Digital Video Recorder for Ness IQ-Series
>3 buttons in sequence while pressing the ID button)
Function Function
Event
Search
Setup
Emergency
Shutdown
Cancel
Function Function
Event
Search
Setup
Emergency
Shutdown
Cancel
Series 960H & SDI DVR
key on the front panel of DVR. Press the button, then the Search
Name of Key
Display System Log Display System Log
Enter Search Mode Enter Search Mode
Enter Setup
Activate Emergency record
Pre-step before Power off step before Power off
(SETUP>SYSTEM>Shutdown) (SETUP>SYSTEM>Shutdown)
Cancel Function key menu Cancel Function key menu
Name of Key
Same as front key (indicate System Log) Same as front key (indicate System Log)
One-touch playback (same function with touch playback (same function with
(PLAY/PAUSE)
Same as front key Same as front key
Same as front key
Pre-step before Power off step before Power off
(SETUP>SYSTEM>Shutdown) (SETUP>SYSTEM>Shutdown)
Cancel Function key menu Cancel Function key menu
10' functions the same as '0'.
Function
Emergency record
Function
key
Page 17