Verifying The Connection Settings - Beward N13103 Installation & User Manual

Wi-fi, megapixel cmos sensor, 16 channel surveillance software included, built-in multi-zone motion and audio detection

Table of Contents

5.7. Verifying the Connection Settings

To verify the network settings of your camera and your computer, you must access the

camera through Internet Explorer.

Launch Internet Explorer. To do so, go to Start – All Programs and click [Internet

Explorer].

Enter the IP address of your camera in the address field (e.g. http://192.168.1.99) (Pic.

5.41).

If the settings are correct, an authorization window will appear. Enter the camera's user

name and password, then click [OK] (Pic. 5.42).

IMPORTANT!

The default user name is admin, the default password is admin.

N13103 Installation User Manual

Chapter 5. Setting Up the Wired Connection for Windows 7

Pic. 5.41

Pic. 5.42

Table of Contents