Please Keep In Mind; Global Prefix/Suffix; Example: Setting A Prefix - Datalogic Powerscan PD7100 Product Reference Manual

Data Editing

Please Keep In Mind...

•
•
•
•

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the barcode
data) and/or as a suffix (in a position following the barcode data) as indicated in
Figure 4. Prefix and Suffix Positions

Example: Setting a Prefix

In this example, we'll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned barcode data. In
2. Scan the ENTER/EXIT barcode.
3. Scan the SET GLOBAL PREFIX barcode.
4. Reference the ASCII Chart on the inside back cover of this manual, to find the hex
102
Modifying a message string is not a mandatory requirement. Data editing is
sophisticated feature allowing highly customizable output for advanced users. Fac-
tory default settings for data editing is typically set to NONE.
A prefix or suffix may be applied (reference the
tings) across all symbologies (set via the Global features in this chapter).
You can add any character from the
cover of this manual as a prefix, suffix or Label ID.
Enter prefixes and suffixes in the order in which you want them to appear on the
output.
Prefix Label ID AIM ID
this example, we'll add a dollar sign ('$') as a prefix.
value assigned to the desired character. The corresponding hex number for the '$'
character is 24. To enter this selection code, scan the '2' and '4' barcodes from
.
Appendix E, Keypad
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.
NOTE
Symbologies
(from 00-FF) on the inside back
ASCII Chart
OR...
Bar Code Data Label ID
00 - 20 Characters (ASCII)
AND
OR
PowerScan
chapter for these set-
Figure 4
Suffix
TM PD7100 Corded
.