Coupon Control - Datalogic Powerscan PD7100 Product Reference Manual

Coupon Control

This feature is used to control the method of processing coupon labels.
Options are:
•
•
•
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the SWITCH barcode.
Coupon Control = Enable only UPC/EAN
Product Reference Guide
Allow all — allow all coupon barcodes to be decoded
Enable only UPC/EAN — enables only UPC/EAN coupon decoding
Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
on this and the facing page to ensure that the reader sees only the barcode you intend to
scan.
ENTER/EXIT PROGRAMMING MODE
Coupon Control = Allow all
DEFAULT
Coupon Control = Enable only GS1 DataBar
Coupon Control
125