Introduction
Use the programming barcodes in this chapter if modifications to the standard RS-
232 interface settings are necessary to meet your system's requirements. Additional
settings which apply to both the RS-232 and USB interfaces are available in
6, RS-232/USB-Com Interfaces
RS-232 Standard Factory Settings
Reference
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the reader's baud
rate to match the baud rate setting of the host device. With an improper baud rate set-
ting, data may not reach the host correctly.
Baud Rate = 2400
Product Reference Guide
RS-232 ONLY Interface
Appendix B, Standard Defaults
ENTER/EXIT PROGRAMMING MODE
.
for a listing of standard factory settings.
Chapter 5
Baud Rate = 1200
Baud Rate = 4800
Chapter
45