STELVIO 1200 NTX
•
Undo and remove the five screws fixing
the alternator belt cover.
•
Remove the oil radiator lower support
bracket and the alternator belt cover.
Locking torques (N*m)
Alternator belt cover screw (radiator bracket
retainer) TCEI M6x40 (2)
nator belt cover screw - TCEI M6x16 (4)
(7.38 lbf ft)
•
Loosen the screw.
•
Loosen the nut and undo the set screw
so that the alternator slides down.
•
Using the belt tensioning tool, tension
the belt to the prescribed torque.
•
Tighten the set screw.
•
Tighten the lock nut.
Specific tooling
020677Y Alternator belt tensioner, Belt ten-
sioning lever
Locking torques (N*m)
Belt tension
50 Nm (36.88 lbf ft)
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Alter-
10 Nm (7.38 lbf ft)
10 Nm
Engine
ENG - 119