MOTO GUZZI Stelvio 1200 NTX Service Manual page 252

Bodywork
•
Remove the TCEI screw (3) (M10x35)
on the upper side.
•
Remove both TCEI screws (4) (M8x40)
in the lower part of the engine guard.
•
Remove the TCEI screw (5) (M8x60) in
the engine guard front section with the
corresponding washer.
•
Remove the screw (6).
•
Remove the hexagonal stud bolt (7)
with the corresponding washer.
•
Remove the left engine guard.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
BODYW - 252
STELVIO 1200 NTX