MOTO GUZZI Stelvio 1200 NTX Service Manual page 46

Electrical system
TABLE C - POSITION OF THE FUEL PUMP CA-
BLE HARNESS
•
Clamp the cable at the front to obtain
the correct position.
•
The connection must be between the
chassis and the air filter.
TABLE D - LAMBDA PROBE SYSTEM CLAMP-
ING
•
Clamp the stand system with the return
pipes in sump and leave the lambda
probe system free
•
The ground lead must be towards the
bottom, tighten the stud bolt nut to
10Nm (7.37 lbf ft).
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ELE SYS - 46
STELVIO 1200 NTX