MOTO GUZZI Stelvio 1200 NTX Service Manual page 91

STELVIO 1200 NTX
•
Operating from both sides, tighten the
upper engine fixing nut on the internal
side of the chassis.
•
Fit the centre stand.
•
Operating from both sides, tighten the
screws fixing the centre stand plates.
•
Remove the engine service stand from
under the oil sump.
•
Working from both sides, place the in-
let manifold fitting a new gasket be-
tween the manifold and head.
•
Fasten the inlet manifold with the three
screws.
•
Connect the stand sensor connector
and fix it to the chassis with new
clamps.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine from vehicle
ENG VE - 91