Removing The Cylinder; Disassembling The Piston - MOTO GUZZI Stelvio 1200 NTX Service Manual

STELVIO 1200 NTX

Removing the cylinder

NOTE
THE OPERATIONS DESCRIBED BELOW REFER TO REMOVING ONLY ONE HEAD BUT APPLY
TO BOTH HEADS.
•
Remove the head, the gasket between
the head and the cylinder and the two
dowel pins.
•
Slide off the movable chain slider.
•
Remove the cylinder from the stud
bolts.
•
Remove the two dowel pins on the stud
bolts.
•
Remove the two gaskets between the
crankcase and the cylinder.
•
Cover the crankcase opening with a
clean cloth.
See also
Removing the cylinder head

Disassembling the piston

NOTE
THE OPERATIONS DESCRIBED BELOW REFER TO REMOVING ONLY ONE HEAD BUT APPLY
TO BOTH HEADS.
•
Remove the cylinder.
•
Cover the crankcase opening with a
clean cloth.
•
Disengage the pin clip.
•
Remove the pin.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 149