MOTO GUZZI Stelvio 1200 NTX Service Manual page 204

Suspensions
•
Fit the bushing.
•
Finger tight the upper cap on the pumping member stem.
•
Compress the spring and then fit a tool
under the pumping member lock nut to
keep the spring compressed.
•
Screw the upper cap on the pumping
member stem.
•
Remove the tool to compress the
spring.
•
Place the sleeve in the vice using the
specified tool.
•
Screw the upper cover, tightening it to
the prescribed torque.
Specific tooling
AP8140149 Protection for fitting operations
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
SUSP - 204
STELVIO 1200 NTX