Chassis
•
Fit the dust guard cap in the gearbox.
•
Lock the dust guard cap with a new
clamp.
•
Place the reaction rod into its seat.
•
Insert the screw.
•
Screw the nut fixing the reaction rod.
•
Place the connecting rod assembly on
the swingarm.
•
Insert the screw.
•
Tighten the fixing nut of the connecting
rod assembly.
•
Place the speed sensor on the fork and
screw the two screws.
•
Fit the rear wheel.
•
Place the rear brake calliper on the disc
and the brake pipe on the fork.
See also
Recommended products chart
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CHAS - 216
STELVIO 1200 NTX