Engine
•
Remove the Seeger ring.
•
Remove the clutch pressure plate.
•
Undo and remove the six screws and
collect the belleville springs.
•
Remove the clutch disc.
See also
Removing the gearbox
Checking the clutch actuator
If the clutch is replaced, measure the length of the
clutch control rod in order to use the correct rod.
Measure as follows:
•
Fit the new clutch on the crankshaft.
•
Fit the clutch control bowl in the gear-
box.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 126
STELVIO 1200 NTX