Cylinder Head - MOTO GUZZI Stelvio 1200 NTX Service Manual

Engine
•
Fit the timing system upper gear back
to the chain.
•
Fit the chain tensioner cap temporarily
and keep the chain taut on the service
shaft.
•
Collect the two head dowel pins.
•
Collect the gasket between the head
and the cylinder.
See also
Removing the head cover

Cylinder head

Removing the overhead camshaft
CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
•
Remove the two rocking levers from
the cam cap.
•
Remove the two rods.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 134
STELVIO 1200 NTX