Removing The Head Cover; Removing The Cylinder Head - MOTO GUZZI Stelvio 1200 NTX Service Manual

STELVIO 1200 NTX
49.O-ring
50.Complete breather cover
51.TBEI screw
52.Timing system chain
53.Chain guide slider
54.Chain tensioner pad
55.Chain tensioner screw
56.Left chain tensioner
57.Spacer

Removing the head cover

NOTE
THE OPERATIONS DESCRIBED BELOW REFER TO REMOVING ONLY ONE HEAD BUT APPLY
TO BOTH HEADS.
•
Disconnect the spark plug tube.
•
Unscrew and remove the four head
cover fixing screws and collect the
sealing O-rings.
•
Remove the head cover together with
the gasket.

Removing the cylinder head

CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 131