MOTO GUZZI Stelvio 1200 NTX Service Manual page 214

Chassis
•
Loosen the ring nut.
Specific tooling
05.91.26.30 Tool for tightening the swingarm
pin ring nut - clutch hub
•
Helped by a second operator, remove
the pin and remove the swingarm to-
gether with the cardan shaft.
Checking
•
Check that the universal joint is not
damaged, the gear teeth inserting in
the sleeve grooves and the grooves on
the joint are not deformed or damaged;
otherwise, replace the joint.
•
Check that the rubber bellows are not
cut or pierced; otherwise, replace it.
•
Check that the fork pin threads and the
fork fixing nuts are not damaged, de-
formed or flattened; otherwise, replace
them.
•
Check that the sleeve grooves are not
damaged, deformed or deteriorated;
otherwise, replace the sleeve.
•
Check that the sleeve outer toothing
and grooves are not damaged.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
CHAS - 214
STELVIO 1200 NTX