Speed Sensor - MOTO GUZZI Stelvio 1200 NTX Service Manual

Electrical system
Battery
12 V - 18 Ampere/hour

Speed sensor

Function
To indicate the vehicle speed by reading the rear
wheel turning speed.
Operation / Operating principle
HALL effect sensor: a square-wave pulse is gen-
erated with voltage between 12 V and 0.3-0.4V
approx.
Level in wiring diagram:
Speed sensor
Location:
•
Sensor: on swingarm, right side, near
the rear brake calliper
•
Connector: near the upper retainer of
the rear shock absorber
Pin-out:
1. Supply voltage (green)
2. Output signal (grey/white)
3. Ground (blue/orange)
PIN:
•
PINS 1-3 Voltage: approx. 12 V
•
PINS 2-3 Voltage: variable 0.4V-12V
(by turning the rear wheel)
AXONE: ELECTRICAL ERRORS
Speed sensor - invalid signal.
Error cause
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ELE SYS - 60
STELVIO 1200 NTX