3.12
System Setup Menu
Diagram 3.23 is a screen shot of the SYSTEM SETUP MENU. This menu is for
setting up any additional options and restoring defaults to the digital recorder. In the
SYSTEM SETUP MENU the following fields are defined as follows:
SYSTEM VERSION: Current system firmware version.
SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the
input signal type automatically from camera 1 while system is booting up.
Users do not need to set it u
Note: The signal type is det
input has to be connected.
LOAD/SAVE CONFIGURATION:
YES: Turn the jog to enter the selection window, there are 4 options
available: CANCEL, DEFAULT, LOAD, and SAVE.
"CANCEL" for leaving the existing window. Select "DEFAULT" to
load factory default values. Select
configuration settings from USB. Select "SAVE" to save existing
Diagram 3.23
p.
ected by the camera 1, so camera 1
"LOAD" to upload and save DVR
54
Select