Camera Setup - EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions

Administrator's Guide and Operating Instructions

6.8 Camera Setup

The Camera Setup allows the administrator to define the behaviors
for each Camera at each Time Type. There are up to 16 Cameras
connected to the system. For each Camera and each Time Type,
you may configure the behaviors as shown on the screen and
described below.
Operations:
After the Camera menu item is selected, the Camera Setup dialog
box will be shown on the screen.
Camera 01
Please click on the item in the Camera List, then click on the Camera
Tag, and then enter the new tag name for the selected Camera by
using the mouse or the keyboard. The Recording Quality and the
Compression Method applies to all cameras. For the "Behaviors
For Each Camera," please click on the item in the Time Type list to
select the Time Type. All the other settings correspond to the
selected Camera shown in the Camera Tag and the highlighted Time
Type in the Time Type list.
The following is a brief description for each item shown above.
27