Displaying The Fish Finder Page; Auto Full Page; 200 Khz Full, 50 Khz Full And 50&200 Khz Display - Standard Horizon FF525 Operation Manual

3.2 DISPLAYING THE FISH FINDER PAGE

This section explains how to show the Fish Finder display pages.
1. Press the
selections appear.
2. Tap on the right or left bottom arrow to scroll the Desktop Icons to display the desired
icon. From the left:
· FULL 200kHz opens the Fish Finder 200 kHz Full page
· FULL 50kHz opens the Fish Finder 50 kHz Full page
· 200kHz & CHART opens the Fish Finder 200 kHz page on the right side and the Chart
page on the left
· 50kHz & CHART opens the Fish Finder 50kHz page on the right side and the Chart page
on the left
· DUAL opens the Fish Finder 200 kHz page on the right side and the 50 kHz page on the left
· ZOOM 200kHz opens the Fish Finder 200 kHz Zoom page
· ZOOM 50kHz opens the Fish Finder 50 kHz Zoom page
· AUTO opens the Fish Finder 50/200 kHz Zoom page.
3. Tap on the desired display. See the example below. All Fish Finder page options are
shown in the following paragraphs.

3.2.0 AUTO FULL PAGE

When this page is selected, the FF525 automatically changes the transmit frequency to
show depths. Automatic switching occurs when depth of water is less than 400 Ft (200 kHz)
and greater than 400 Ft (50 kHz).
3.2.1 200 kHz FULL, 50 kHz FULL AND 50&200 kHz DISPLAY PAGES
Allows the user to setup the CPN Series Chart Plotters display to show 200 kHz, 50 kHz or
200/50 kHz split screen Fish Finder.
CPN and FF525 Operation Manual
key, tap on Fishfinder. In the bottom of the page the available
Page 13