Table of Contents
Advertisement
70
Scope of Delivery
Scope of Delivery
One communications system Forum 524 Rack
One AC adapter with connection cable
Connection cable for the ISDN S
V.24 patch cable (connects V.24 card with front panel)
1 CD
Installing Interface Cards
Please note also the explanations in these sections: Installing
Interface Cards starting on page 40. To install the card, perform
the following steps:
1. Switch off the Forum 524 Rack and pull the plug out of the
mains power supply. Unscrew the screws of the top cover.
Take the top cover off.
2. To discharge, touch a radiator or another metallic installation
connected to earth ground. Take the interface card out of its
packaging. Check that it is the correct type of card. There is a
label specifying the type on the connector.
CAUTION!
Static charges can damage the electronic components of
the Forum 524 Rack.
3. Carefully plug the interface card into its designated slot.
Make sure the card is sitting firmly in the slot.
Mounting the Forum 524 Rack InfoCom System
port
0
Advertisement
Table of Contents
