Table of Contents
Advertisement
Installation
To install the Forum 523/524 please perform the following steps
in the order suggested.
1. Check the scope of delivery (see Scope of Delivery on
page 32), read Safety Precautions starting on page 32 and
information on Mounting Location starting on page 35.
2. Open Forum 523/524 (see Opening and Closing Forum 523/
524 starting on page 36)
3. Install interface cards, if provided (see Interface Cards starting
on page 40)
4. Mount the device on the wall (Mounting starting on page 47)
5. Connect terminals (see Port Assignment, Termination,
Cable Length starting on page 48)
6. If available: externally connect S
starting on page 48)
7. Plug power cord into power supply unit
8. Close Forum 523/524 (see Opening and Closing Forum 523/
524 starting on page 36)
9. Switch on power supply
Wait until the system is initiated (takes about 2 minutes). The
system telephone software is initialised automatically (the
display will then show the telephone's internal phone number).
Call an external number to check basic functionality.
10.Connect PC/network to LAN1 for configuration
11.Close Forum 523/524
12.Open configuration software (Configurator) in the browser (see
Configuration starting on page 72); access data are:
Address (URL): http://192.168.99.254/
User: Administrator
Password: No password assigned
System PIN: 0000
to NTBA (see S
0
Ports
0
Installation
31
Advertisement
Table of Contents
